Proxxon Micro Woodturning Lathe
Proxxon Micro Woodturning Lathe
Turning in miniature is a great stress reliever in addition to a pleasing hobby. One can make glasses, cups, saucers, vases and columns for a doll house. For model railroads, one can consequently make lighting masts, windows, tanks. In addition, literally hundreds of classical miniature turning tasks may be carried out with ease. The electronic speed control assists in a “semi-automated” painting process therefore, providing accuracy. Alternatively clamping the work piece with collets. A set of six collets in sizes 2 – 3 – 4 – 6 – 8 and 10mm (5/64″ – 1/8″ – 5/32″ – 15/64″ – 5/16″ – 13/32″) is included.
Technical data:
Motor 110 – 120V AC, centre distance of 10″ (250mm), 1 3/5″ (40mm) swing. 1″ (25mm) swing over support. 1/8 hp (100W), 60Hz. Variable speed control covering between 1,000 and 5,000 rpm. Headstock spindle bore of 13/32″ (10mm). Tailstock travel 1 3/16″ (20mm). Drive center, live center and face plate.
-
Proxxon Micro Woodturning Lathe DB 250
Proxxon Micro Woodturning LatheYou can make literally hundreds of classical miniature turning tasks may be carried out with ease - while having a great deal of fun at the same time. NO DISCOUNTSCA $313.95 -
Five piece HSS Chisel Set
Proxxon Micro Woodturning LatheFive piece HSS chisel set. A high quality set with the most frequently used turning tools: gouge, skew, parting tool, beading tool and scraper. Neatly packed in a wooden box.CA $120.15 -
3 Jaw Chuck
Proxxon Micro Woodturning LatheThree jaw chuck for the lathe DB 250. Used for concentric clamping. Made from steel and offering 1/16" - 1 13/32" (1.5 to 32mm) and 1/2" - 2 14/32" (12 to 65mm) when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 head-stock spindle. NO DISCOUNTSCA $118.27 -
4 Jaw Chuck
Proxxon Micro Woodturning LatheIndependent four jaw chuck for the DB 250 with individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from (1.5 - 35mm) (inside) and from 14 - 67mm (outside). The DB 250 head-stock spindle of thread M16 x 1 screws directly into the chuck.CA $73.92 -
Drill chuck with sliding sleeve
Proxxon Micro Woodturning LatheDrill chuck with sliding sleeve for the tailstock of the DB 250. Clamps up to 13/64" (5.0mm). Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstockCA $32.26