Arbortech Random Contour Sander

This random sander includes everything you need to get started. The metal shaft contains two independently rotating shafts that produce the “random” action. The flexible rubber backing pad and 35 adhesive-backed sanding discs ranging from #80 to #600 grit.

This Arbortech Random Contour Sander converts the simple rotation of your angle grinder to a random orbital pattern. The result is an exceptionally smoothly sanded surface. Furthermore, its small 2” diameter ultra-flexible pad will reach into deep profiles and contours. It has a 2-1/2” shaft that therefore lets the sanding head reach into deep hollows. These areas would otherwise be impossible to reach. The flexible sanding pad molds to the shape of your surface and as a result will not dig in at the edges. The sanding discs attache quickly to the pad by use of a flange and screw which are also included.

The random sander tool fits any standard 4″ or 4 1⁄2″ angle grinder. Setup requires only a few minutes and the learning curve is pretty fast. It doesn’t leave burn marks, scratches or edge gouges. The 50mm backing pad easily navigated around the tightest curves and the sanding discs held up for a considerable amount of time.

Arbortech Random Contour Sander Kit includes:

1 Random Sander Attachment, 1 Backing Pad, and 5 each of self-adhesive sanding discs in the following grits: 80, 120, 180, 240, 320, 400, and 600 (total 35 discs.). Angle grinder is NOT included

Additional Sanding Discs can be purchased in various grits.