Foredom Reciprocating Handpiece 50
CA $88.53
Same handpiece as 50C, but without the chisels. The easy to maintain chisel handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors. Because it attaches to any flex shaft machine with a standard key tip shaft it can be used with our Wecheer HD model.
Foredom Reciprocating Handpiece 50
This Foredom Reciprocating Handpiece 50 comes without chisels. It has a contoured body design with a rugged plastic barrel and tapered aluminum ends. Similar in appearance to the popular 44T. The easy to maintain chisel handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors. Because it attaches to any flex shaft machine with a standard key tip shaft it can be used with our Wecheer HD model. The Chisel Handpiece must be used only in the forward motor direction. Optimum Speed Range is 3,000 to 8,000 rpm. Most noteworthy, it has Max. Operating Speed- 18,000 rpm. but operating in excessof 8,000 will cause premature wear.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.
Operating Tip: Using the new chisel handpiece with a dial speed control is easier than with a foot operated control. Consider adding the appropriate dial speed control to your order or a flex shaft with a dial control in its base:
* EM (for Series S, SR motors)
* EMX (for Series TX motors)
Foredom offers 22 quality-made, pre-sharpened steel chisels. They come individually and in sets. These chisels are for use in our H.50 and H.50C handpieces.